FluxBoating

Does the Flux trolling motor mount fit your boat?

Almost certainly, yes. The mount is one reversible 6061-T6 aluminum plate that works on either side of the bow and accepts both 4-bolt and 6-bolt puck patterns — Minn Kota, MotorGuide, and most major trolling motor brands. If your boat has a flat section of bow deck, it fits.

Pick your builder below for brand-specific install notes, check compatibility by motor brand, or go straight to the product page.

Want to be certain before you buy? Test-fit it in cardboard.

Print the free drill template at 100% scale (port / starboard), glue it to cardboard, and cut it out. Set the cardboard plate on your bow to verify the footprint, underside wrench access, and motor clearance — before you spend a dollar or drill a hole. Full steps in the installation guide.

Blackfin →Blue Wave →Boston Whaler →Bulls Bay →Cape Horn →Carolina Skiff →Century →Cobia →Contender →EdgeWater →Everglades →Grady-White →Hewes →Key West →Mako →NauticStar →Parker →Pathfinder →Pioneer →Pursuit →Regulator →Robalo →Sailfish →Scout →Sea Fox →Sea Hunt →Sea Pro →Sportsman →Tidewater →Twin Vee →Wellcraft →World Cat →Yellowfin →

Don't see your builder? The plate is universal — it fits center consoles from every major manufacturer. Ask us if you're not sure about your deck.